Views: 0 Author: Site Editor Publish Time: 2022-05-30 Origin: Site
Energy Conservation and Environmental ProtectionA fluorescent bulb consists of a glass tube with a phosphorus coating, a small amount of inert gas (usually argon or krypton), mercury, and a set of electrodes. Contact points on the outside of the tube carry electricity into the bulb. Instructions: The animation below (1:04) shows a step-by-step depiction of how fluorescent lamps provide light. This is because a lot of the energy that is produced is wasted because it is transformed into heat instead of light. LED tubes remain relatively cool, so the maximum amount of light can be produced, while there is little to no wasteful heat produced. Working Principle of Fluorescent light StarterThe working principle of starter. The working principle is: when the switch is on, the power supply voltage is immediately added to the two poles of the starter through the ballast and the lamp filament. The voltage of 220 V immediately ionizes the inert gas of the starter and produces glow discharge. The heat of this process makes the . Tube Light Circuit" is about how to wiring fluorescent light and "how a Fluorescent Tube Light works". The wiring process of fluorescent tube lamp/light with Ballast,Starter is quite easy and simple. In most cases when we buy a fluorescent light it comes in a complete set with all wire connected. The complete guide to ballasts for fluorescent lights Turn off power to the fixture. Open fixture and remove the bulb and ballast casing. Using the wire cutters, cut both power (brown) and neutral (blue) wires coming into the fixture. Cap the wires with wire nuts. Use the wire cutters to cut the wires connected to the sockets. Remove the magnetic ballast.